- Home
- »
- Our Products
- »
- Brass Ball Valve & FCU Ball Valve Strainer Type
Brass Ball Valve & FCU Ball Valve Strainer Type
Brass Ball Valve 15 Mm
Minimum Order Quantity: 1 Piece
| Valve Size | up to 1/2 inch |
| Media | Water |
| Connector Type | Screwed |
| Operating Pressure | up to 20 Kg/ cm.sq. |
| Material | Brass / Bronze |
| Connection End | Screwed |
| Usage/Application | Water / Air |
- Screwed female ends
- Full bore, Two piece design
- Quarter turn, Lever operated
- Working Temperature: -10°C to 100°C
- Forged Brass Body, BSP Thread
- Test Pressure: 30 to 40kg / cm2g
| S.No. | Description | Material |
| 1 | Body | CW617N Brass |
| 2 | Cap | CW617N Brass |
| 3 | Ball | Chrome Plated Brass |
| 4 | Stem | Brass |
| 5 | Handle | MS – pickeled to prevent corrosion |
| 6 | Ball Seat | PTFE |
| 7 | Handle Sleeve | PVC |
| 8 | Stem Seat | PTFE |
| 9 | Nut | Brass |
| 10 | Counter Nut | Brass |
| 11 | Washer | SS |
| Chemical Composition of Brass Valves | ||||||||||||||||||||||
| CW617N Standard |
Cu | Pb | Ni | Sn | Fe | Al | Zn | |||||||||||||||
| Min. % | 57.0 | 1.6 | 0.0 | 0.0 | 0.0 | 0.0 | Bal. | |||||||||||||||
| Max. % | 59.0 | 2.5 | 0.3 | 0.3 | 0.3 | 0.05 | Bal. | |||||||||||||||
| SIZE | DN | A | B | H | L | J | PN |
| 1/4″ | 8 | 13.5 | 48.5 | 38.0 | 66.5 | Ø23.0 | 30 |
| 3/8″ | 10 | 12.0 | 45.5 | 39.0 | 63.5 | Ø25.5 | 30 |
| 1/2″ | 15 | 16.0 | 57.0 | 54.5 | 97.0 | Ø29.6 | 40 |
| 3/4″ | 20 | 13.0 | 58.0 | 58.5 | 97.0 | Ø37.0 | 40 |
| 1″ | 25 | 16.0 | 69.5 | 57.0 | 118.0 | Ø43.5 | 40 |
| 1-1/4″ | 32 | 15.5 | 75.0 | 72.0 | 127.0 | Ø54.5 | 40 |
| 1-1/2″ | 40 | 17.0 | 88.0 | 77.0 | 127.0 | Ø66.8 | 40 |
| 2″ | 50 | 17.0 | 100.5 | 92.0 | 151.0 | Ø82.7 | 50 |
| 2-1/2″ | 65 | 23.0 | 125.5 | 113.0 | 244.0 | Ø95.0 | 25 |
| 3″ | 80 | 26.0 | 138.5 | 115.5 | 244.0 | Ø107.5 | 25 |
| 4″ | 100 | 27.5 | 165.0 | 135.5 | 244.0 | Ø144.0 | 25 |
3/4inch Brass Ball Valves
Minimum Order Quantity: 1 Piece
| Valve Size | 3/4 inch |
| Media | Water |
| Operating Pressure | up to 20 Kg/ cm.sq. |
| Connection End | Screwed |
| Material | Brass / Bronze |
| Usage/Application | Water / Air |
- Screwed female ends
- Full bore, Two piece design
- Quarter turn, Lever operated
- Working Temperature: -10°C to 100°C
- Forged Brass Body, BSP Thread
- Test Pressure: 30 to 40kg / cm2g
| S.No. | Description | Material |
| 1 | Body | CW617N Brass |
| 2 | Cap | CW617N Brass |
| 3 | Ball | Chrome Plated Brass |
| 4 | Stem | Brass |
| 5 | Handle | MS – pickeled to prevent corrosion |
| 6 | Ball Seat | PTFE |
| 7 | Handle Sleeve | PVC |
| 8 | Stem Seat | PTFE |
| 9 | Nut | Brass |
| 10 | Counter Nut | Brass |
| 11 | Washer | SS |
| Chemical Composition of Brass Valves | ||||||||||||||||||||||
| CW617N Standard |
Cu | Pb | Ni | Sn | Fe | Al | Zn | |||||||||||||||
| Min. % | 57.0 | 1.6 | 0.0 | 0.0 | 0.0 | 0.0 | Bal. | |||||||||||||||
| Max. % | 59.0 | 2.5 | 0.3 | 0.3 | 0.3 | 0.05 | Bal. | |||||||||||||||
| SIZE | DN | A | B | H | L | J | PN |
| 1/4″ | 8 | 13.5 | 48.5 | 38.0 | 66.5 | Ø23.0 | 30 |
| 3/8″ | 10 | 12.0 | 45.5 | 39.0 | 63.5 | Ø25.5 | 30 |
| 1/2″ | 15 | 16.0 | 57.0 | 54.5 | 97.0 | Ø29.6 | 40 |
| 3/4″ | 20 | 13.0 | 58.0 | 58.5 | 97.0 | Ø37.0 | 40 |
| 1″ | 25 | 16.0 | 69.5 | 57.0 | 118.0 | Ø43.5 | 40 |
| 1-1/4″ | 32 | 15.5 | 75.0 | 72.0 | 127.0 | Ø54.5 | 40 |
| 1-1/2″ | 40 | 17.0 | 88.0 | 77.0 | 127.0 | Ø66.8 | 40 |
| 2″ | 50 | 17.0 | 100.5 | 92.0 | 151.0 | Ø82.7 | 50 |
| 2-1/2″ | 65 | 23.0 | 125.5 | 113.0 | 244.0 | Ø95.0 | 25 |
| 3″ | 80 | 26.0 | 138.5 | 115.5 | 244.0 | Ø107.5 | 25 |
| 4″ | 100 | 27.5 | 165.0 | 135.5 | 244.0 | Ø144.0 | 25 |
Fcu Valve
Minimum Order Quantity: 1 Piece
Product Brochure
| Valve Size | 3/4 inch |
| Material | BRASS |
| Packaging Size | 1 |
| Usage/Application | WATER/ FCU |
| Country of Origin | Made in India |
VC Series balanced 2-position hydronic valves are used in domestic and small commercial heating and cooling applications to control the flow of hot and/or cold water.
They consist of an actuator, valve and a cartridge assembly. 2-way valves are designed for on-off zone control of domestic systems.
3-way valves can be piped for diverting applications in domestic central heating and/or cooling systems.
Both versions can be used to control individual fan coil, radiator, space heater or convector applications.
They can be controlled by a line voltage SPST or SPDT controller such as a room thermostat, aquastat or flow switch.
VC Series hydronic valves are designed to take advantage of sinusoidal valve actuator travel, and therefore operate silently and reduce water hammer.
Through internal logic the actuator only takes power while driving the valve to the commanded position.
The actuator head is removable without affecting the integrity of the water system.
All actuator versions are interchangeable with any valve body, offering the highest flexibility for installation in the field or boiler production line assembly, and maintenance.
The valve piston construction allows for port sealing that is independent of the differential pressure across the valve.
Flow through the 2-way valve can be in either direction, so the ports are not designated.
3-way valves are suitable for both diverting water from AB to A or B, and from A or B to AB
Brass Ball Valve With Strainer
Minimum Order Quantity: 1 Piece
Product Brochure
| Media | Water |
| Connector Type | Threaded |
| Operating Pressure | 25 Kg/ cm.sq. |
| Connection End | Flare |
| Diameter | 3/4" X 5/8" |
| Automation Grade | Manual |
| Usage/Application | For FCU |
| Color | Golden |
| Material | Brass / Bronze |
Size: 3/4" x 5/8" Castle Ball Valve with Strainers is used in HVAC and Plumbing sectors. These valves are extensions of Castle Ball Valves. The strainer performs the function of removing the particulates from the fluids passing through it via the filtering element intersecting the main channel. The strainer consists of a cylindrical mesh that protects the valuable downstream equipment such as pumps, regulators etc. from being damaged from the contaminants.
Product Range-
Body: Forged Brass
-
Ball: Forged Brass
-
Stem: Forged Brass
-
Seat: PTFE
-
Pressure Rating: PN25
3/8" Brass Ball Valve
Minimum Order Quantity: 1 Piece
| Media | Water |
| Connector Type | Screwed |
| Operating Pressure | up to 20 Kg/ cm.sq. |
| Material | Brass / Bronze |
| Connection End | Screwed |
| Automation Grade | Manual |
| Usage/Application | Water / Air |
| Country of Origin | Made in India |
- Screwed female ends
- Full bore, Two piece design
- Quarter turn, Lever operated
- Working Temperature: -10°C to 100°C
- Forged Brass Body, BSP Thread
- Test Pressure: 30 to 40kg / cm2g
| S.No. | Description | Material |
| 1 | Body | CW617N Brass |
| 2 | Cap | CW617N Brass |
| 3 | Ball | Chrome Plated Brass |
| 4 | Stem | Brass |
| 5 | Handle | MS – pickeled to prevent corrosion |
| 6 | Ball Seat | PTFE |
| 7 | Handle Sleeve | PVC |
| 8 | Stem Seat | PTFE |
| 9 | Nut | Brass |
| 10 | Counter Nut | Brass |
| 11 | Washer | SS |
| Chemical Composition of Brass Valves | ||||||||||||||||||||||
| CW617N Standard |
Cu | Pb | Ni | Sn | Fe | Al | Zn | |||||||||||||||
| Min. % | 57.0 | 1.6 | 0.0 | 0.0 | 0.0 | 0.0 | Bal. | |||||||||||||||
| Max. % | 59.0 | 2.5 | 0.3 | 0.3 | 0.3 | 0.05 | Bal. | |||||||||||||||
| SIZE | DN | A | B | H | L | J | PN |
| 1/4″ | 8 | 13.5 | 48.5 | 38.0 | 66.5 | Ø23.0 | 30 |
| 3/8″ | 10 | 12.0 | 45.5 | 39.0 | 63.5 | Ø25.5 | 30 |
| 1/2″ | 15 | 16.0 | 57.0 | 54.5 | 97.0 | Ø29.6 | 40 |
| 3/4″ | 20 | 13.0 | 58.0 | 58.5 | 97.0 | Ø37.0 | 40 |
| 1″ | 25 | 16.0 | 69.5 | 57.0 | 118.0 | Ø43.5 | 40 |
| 1-1/4″ | 32 | 15.5 | 75.0 | 72.0 | 127.0 | Ø54.5 | 40 |
| 1-1/2″ | 40 | 17.0 | 88.0 | 77.0 | 127.0 | Ø66.8 | 40 |
| 2″ | 50 | 17.0 | 100.5 | 92.0 | 151.0 | Ø82.7 | 50 |
| 2-1/2″ | 65 | 23.0 | 125.5 | 113.0 | 244.0 | Ø95.0 | 25 |
| 3″ | 80 | 26.0 | 138.5 | 115.5 | 244.0 | Ø107.5 | 25 |
| 4″ | 100 | 27.5 | 165.0 | 135.5 | 244.0 | Ø144.0 | 25 |
1 1/4" Brass Ball Valve
Minimum Order Quantity: 1 Piece
| Media | Gas |
| Connector Type | Screwed |
| Operating Pressure | 30 Kg/ cm.sq. |
| Operating Temperature | 50 degree C |
| Automation Grade | Manual |
| Material | Brass |
- Screwed female ends
- Full bore, Two piece design
- Quarter turn, Lever operated
- Working Temperature: -10°C to 100°C
- Forged Brass Body, BSP Thread
- Test Pressure: 30 to 40kg / cm2g
| S.No. | Description | Material |
| 1 | Body | CW617N Brass |
| 2 | Cap | CW617N Brass |
| 3 | Ball | Chrome Plated Brass |
| 4 | Stem | Brass |
| 5 | Handle | MS – pickeled to prevent corrosion |
| 6 | Ball Seat | PTFE |
| 7 | Handle Sleeve | PVC |
| 8 | Stem Seat | PTFE |
| 9 | Nut | Brass |
| 10 | Counter Nut | Brass |
| 11 | Washer | SS |
| Chemical Composition of Brass Valves | ||||||||||||||||||||||
| CW617N Standard |
Cu | Pb | Ni | Sn | Fe | Al | Zn | |||||||||||||||
| Min. % | 57.0 | 1.6 | 0.0 | 0.0 | 0.0 | 0.0 | Bal. | |||||||||||||||
| Max. % | 59.0 | 2.5 | 0.3 | 0.3 | 0.3 | 0.05 | Bal. | |||||||||||||||
| SIZE | DN | A | B | H | L | J | PN |
| 1/4″ | 8 | 13.5 | 48.5 | 38.0 | 66.5 | Ø23.0 | 30 |
| 3/8″ | 10 | 12.0 | 45.5 | 39.0 | 63.5 | Ø25.5 | 30 |
| 1/2″ | 15 | 16.0 | 57.0 | 54.5 | 97.0 | Ø29.6 | 40 |
| 3/4″ | 20 | 13.0 | 58.0 | 58.5 | 97.0 | Ø37.0 | 40 |
| 1″ | 25 | 16.0 | 69.5 | 57.0 | 118.0 | Ø43.5 | 40 |
| 1-1/4″ | 32 | 15.5 | 75.0 | 72.0 | 127.0 | Ø54.5 | 40 |
| 1-1/2″ | 40 | 17.0 | 88.0 | 77.0 | 127.0 | Ø66.8 | 40 |
| 2″ | 50 | 17.0 | 100.5 | 92.0 | 151.0 | Ø82.7 | 50 |
| 2-1/2″ | 65 | 23.0 | 125.5 | 113.0 | 244.0 | Ø95.0 | 25 |
| 3″ | 80 | 26.0 | 138.5 | 115.5 | 244.0 | Ø107.5 | 25 |
| 4″ | 100 | 27.5 | 165.0 | 135.5 | 244.0 | Ø144.0 | 25 |
Brass Ball Valve 40mm
Minimum Order Quantity: 1 Piece
| Media | Water |
| Operating Pressure | up to 20 Kg/ cm.sq. |
| Connection End | Screwed |
| Automation Grade | Manual |
| Material | Brass / Bronze |
| Usage/Application | Water / Air |
- Screwed female ends
- Full bore, Two piece design
- Quarter turn, Lever operated
- Working Temperature: -10°C to 100°C
- Forged Brass Body, BSP Thread
- Test Pressure: 30 to 40kg / cm2g
| S.No. | Description | Material |
| 1 | Body | CW617N Brass |
| 2 | Cap | CW617N Brass |
| 3 | Ball | Chrome Plated Brass |
| 4 | Stem | Brass |
| 5 | Handle | MS – pickeled to prevent corrosion |
| 6 | Ball Seat | PTFE |
| 7 | Handle Sleeve | PVC |
| 8 | Stem Seat | PTFE |
| 9 | Nut | Brass |
| 10 | Counter Nut | Brass |
| 11 | Washer | SS |
| Chemical Composition of Brass Valves | ||||||||||||||||||||||
| CW617N Standard |
Cu | Pb | Ni | Sn | Fe | Al | Zn | |||||||||||||||
| Min. % | 57.0 | 1.6 | 0.0 | 0.0 | 0.0 | 0.0 | Bal. | |||||||||||||||
| Max. % | 59.0 | 2.5 | 0.3 | 0.3 | 0.3 | 0.05 | Bal. | |||||||||||||||
| SIZE | DN | A | B | H | L | J | PN |
| 1/4″ | 8 | 13.5 | 48.5 | 38.0 | 66.5 | Ø23.0 | 30 |
| 3/8″ | 10 | 12.0 | 45.5 | 39.0 | 63.5 | Ø25.5 | 30 |
| 1/2″ | 15 | 16.0 | 57.0 | 54.5 | 97.0 | Ø29.6 | 40 |
| 3/4″ | 20 | 13.0 | 58.0 | 58.5 | 97.0 | Ø37.0 | 40 |
| 1″ | 25 | 16.0 | 69.5 | 57.0 | 118.0 | Ø43.5 | 40 |
| 1-1/4″ | 32 | 15.5 | 75.0 | 72.0 | 127.0 | Ø54.5 | 40 |
| 1-1/2″ | 40 | 17.0 | 88.0 | 77.0 | 127.0 | Ø66.8 | 40 |
| 2″ | 50 | 17.0 | 100.5 | 92.0 | 151.0 | Ø82.7 | 50 |
| 2-1/2″ | 65 | 23.0 | 125.5 | 113.0 | 244.0 | Ø95.0 | 25 |
| 3″ | 80 | 26.0 | 138.5 | 115.5 | 244.0 | Ø107.5 | 25 |
| 4″ | 100 | 27.5 | 165.0 | 135.5 | 244.0 | Ø144.0 | 25 |
1" Brass Ball Valve
Minimum Order Quantity: 1 Piece
| Valve Size | 1 inch |
| Media | Water |
| Connector Type | Screwed |
| Operating Pressure | up to 20 Kg/ cm.sq. |
| Automation Grade | Manual |
| Material | Brass / Bronze |
- Screwed female ends
- Full bore, Two piece design
- Quarter turn, Lever operated
- Working Temperature: -10°C to 100°C
- Forged Brass Body, BSP Thread
- Test Pressure: 30 to 40kg / cm2g
| S.No. | Description | Material |
| 1 | Body | CW617N Brass |
| 2 | Cap | CW617N Brass |
| 3 | Ball | Chrome Plated Brass |
| 4 | Stem | Brass |
| 5 | Handle | MS – pickeled to prevent corrosion |
| 6 | Ball Seat | PTFE |
| 7 | Handle Sleeve | PVC |
| 8 | Stem Seat | PTFE |
| 9 | Nut | Brass |
| 10 | Counter Nut | Brass |
| 11 | Washer | SS |
| Chemical Composition of Brass Valves | ||||||||||||||||||||||
| CW617N Standard |
Cu | Pb | Ni | Sn | Fe | Al | Zn | |||||||||||||||
| Min. % | 57.0 | 1.6 | 0.0 | 0.0 | 0.0 | 0.0 | Bal. | |||||||||||||||
| Max. % | 59.0 | 2.5 | 0.3 | 0.3 | 0.3 | 0.05 | Bal. | |||||||||||||||
| SIZE | DN | A | B | H | L | J | PN |
| 1/4″ | 8 | 13.5 | 48.5 | 38.0 | 66.5 | Ø23.0 | 30 |
| 3/8″ | 10 | 12.0 | 45.5 | 39.0 | 63.5 | Ø25.5 | 30 |
| 1/2″ | 15 | 16.0 | 57.0 | 54.5 | 97.0 | Ø29.6 | 40 |
| 3/4″ | 20 | 13.0 | 58.0 | 58.5 | 97.0 | Ø37.0 | 40 |
| 1″ | 25 | 16.0 | 69.5 | 57.0 | 118.0 | Ø43.5 | 40 |
| 1-1/4″ | 32 | 15.5 | 75.0 | 72.0 | 127.0 | Ø54.5 | 40 |
| 1-1/2″ | 40 | 17.0 | 88.0 | 77.0 | 127.0 | Ø66.8 | 40 |
| 2″ | 50 | 17.0 | 100.5 | 92.0 | 151.0 | Ø82.7 | 50 |
| 2-1/2″ | 65 | 23.0 | 125.5 | 113.0 | 244.0 | Ø95.0 | 25 |
| 3″ | 80 | 26.0 | 138.5 | 115.5 | 244.0 | Ø107.5 | 25 |
| 4″ | 100 | 27.5 | 165.0 | 135.5 | 244.0 | Ø144.0 | 25 |
2 Inch Brass Ball Valve
Minimum Order Quantity: 1 Piece
| Valve Size | 2 inch |
| Media | Water |
| Connector Type | Screwed |
| Operating Pressure | up to 20 Kg/ cm.sq. |
| Material | Brass / Bronze |
| Connection End | Screwed |
| Usage/Application | Water / Air |
- Screwed female ends
- Full bore, Two piece design
- Quarter turn, Lever operated
- Working Temperature: -10°C to 100°C
- Forged Brass Body, BSP Thread
- Test Pressure: 30 to 40kg / cm2g
| S.No. | Description | Material |
| 1 | Body | CW617N Brass |
| 2 | Cap | CW617N Brass |
| 3 | Ball | Chrome Plated Brass |
| 4 | Stem | Brass |
| 5 | Handle | MS – pickeled to prevent corrosion |
| 6 | Ball Seat | PTFE |
| 7 | Handle Sleeve | PVC |
| 8 | Stem Seat | PTFE |
| 9 | Nut | Brass |
| 10 | Counter Nut | Brass |
| 11 | Washer | SS |
| Chemical Composition of Brass Valves | ||||||||||||||||||||||
| CW617N Standard |
Cu | Pb | Ni | Sn | Fe | Al | Zn | |||||||||||||||
| Min. % | 57.0 | 1.6 | 0.0 | 0.0 | 0.0 | 0.0 | Bal. | |||||||||||||||
| Max. % | 59.0 | 2.5 | 0.3 | 0.3 | 0.3 | 0.05 | Bal. | |||||||||||||||
| SIZE | DN | A | B | H | L | J | PN |
| 1/4″ | 8 | 13.5 | 48.5 | 38.0 | 66.5 | Ø23.0 | 30 |
| 3/8″ | 10 | 12.0 | 45.5 | 39.0 | 63.5 | Ø25.5 | 30 |
| 1/2″ | 15 | 16.0 | 57.0 | 54.5 | 97.0 | Ø29.6 | 40 |
| 3/4″ | 20 | 13.0 | 58.0 | 58.5 | 97.0 | Ø37.0 | 40 |
| 1″ | 25 | 16.0 | 69.5 | 57.0 | 118.0 | Ø43.5 | 40 |
| 1-1/4″ | 32 | 15.5 | 75.0 | 72.0 | 127.0 | Ø54.5 | 40 |
| 1-1/2″ | 40 | 17.0 | 88.0 | 77.0 | 127.0 | Ø66.8 | 40 |
| 2″ | 50 | 17.0 | 100.5 | 92.0 | 151.0 | Ø82.7 | 50 |
| 2-1/2″ | 65 | 23.0 | 125.5 | 113.0 | 244.0 | Ø95.0 | 25 |
| 3″ | 80 | 26.0 | 138.5 | 115.5 | 244.0 | Ø107.5 | 25 |
| 4″ | 100 | 27.5 | 165.0 | 135.5 | 244.0 | Ø144.0 | 25 |
32 MM Castle Brass Ball Valve With & Without Strainer
Minimum Order Quantity: 1 Piece
Product Brochure
| Media | Water |
| Connector Type | Threaded |
| Operating Pressure | 25 Kg/ cm.sq. |
| Thread Type | Screwed |
| Automation Grade | Manual |
| Usage/Application | Water , Fcu |
| Color | Golden |
| Material | Brass / Bronze |
Castle Ball Valve with Strainers is used in HVAC and Plumbing sectors. These valves are extensions of Castle Ball Valves. The strainer performs the function of removing the particulates from the fluids passing through it via the filtering element intersecting the main channel. The strainer consists of a cylindrical mesh that protects the valuable downstream equipment such as pumps, regulators etc. from being damaged from the contaminants.
Product Range-
Body: Forged Brass
-
Ball: Forged Brass
-
Stem: Forged Brass
-
Seat: PTFE
-
Pressure Rating: PN25
Fcu Brass Ball Valve
Minimum Order Quantity: 1 Piece
Product Brochure
| Media | Water |
| Connector Type | Threaded |
| Operating Pressure | 25 Kg/ cm.sq. |
| Connection End | Flare |
| Diameter | 1" x 5/8" |
| Automation Grade | Manual |
| Usage/Application | Water , Fcu |
| Color | Golden |
| Material | Brass / Bronze |
SIZE: 1" X 5/8" Castle Ball Valve with Strainers is used in HVAC and Plumbing sectors. These valves are extensions of Castle Ball Valves. The strainer performs the function of removing the particulates from the fluids passing through it via the filtering element intersecting the main channel. The strainer consists of a cylindrical mesh that protects the valuable downstream equipment such as pumps, regulators etc. from being damaged from the contaminants.
Product Range-
Body: Forged Brass
-
Ball: Forged Brass
-
Stem: Forged Brass
-
Seat: PTFE
-
Pressure Rating: PN25