Call 08047647083 65% Response Rate

Send Email

Water Flow Switch & Meter Honeywell Wika Anergy

 

APPLICATION

The paddle type SPDT WFS series are designed to provide excellent

performance where accuracy, reliability, and rugged construction are

required used in liquid flow lines carrying water or any fluid neither

harmful to brass and prosphor bronze nor classified as a hazardous

fluids.

They can be wired to close one circuit and open a second circuit when

liquid flow either exceeds or drops below the adjusted flow rate.

The WFS series are recommended for liquid pressure and temperature

as mentioned below and must not be used on lines carrying liquids below

0 oC.

These series may be used on liquids with high salt or chlorine content

but is not for use in hazardous atmospheres.

They may be also used outdoors but must be protected from weather or

splashing water.

All series WFS flow switches are designed for use only as operating

controls.

Where an operating control failure would result in personal injury and/or

loss of property, it is the responsibility of user to add safety devices that

protect against, or supervisory systems that warn of control failure.

 

Wika Water Flow Switch FSM 6100

Wika Water Flow Switch FSM 6100
  • Wika Water Flow Switch FSM 6100
  • Wika Water Flow Switch FSM 6100
  • Wika Water Flow Switch FSM 6100
Get Best Quote
Product Price: Rs 1,450 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Flow Switch TypeWater Flow Switch
BrandWika
Usage/ApplicationWater
Model Name/NumberFSM 6100
Operating PressurePN 10 / PN 16
Flow Media TypeLiquid
MOCBrass
Flow switchFor industrial heat exchangersModel FSM-6100Flow switch, model FSM-6100DescriptionThe model FSM-6100 electromechanical flow switch isdesigned for the detection of interrupted flow (“no flow”) ofwater and other non-corrosive liquids in industrial coolers,heaters or other industrial pipelines.The flow switch signal is used for operational controlsthat prevent system failure, e.g. due to ice formation in theabsence of cooling water flow.The cost-effective flow switch is enclosed by a plastic case.The ingress protection of IP30 protects it from unwantedingress of foreign bodies.The model FSM-6100 is equipped with UL-listedmicroswitches and protective bellows to ensure high durabilitywith continuous operation and a long service life.The range of flow ranges, with pipe sizes from 25 ... 150 mm[1 ... 6 in], enables use for flow measurement in a variety ofapplications with non-critical media.Applications■ Heating, cooling, air-conditioning and water treatmentplants■ Pumps and dosing systems■ Operational controls to prevent system failures in theabsence of supply of water or liquidSpecial features■ Switch point repeatability of ±0.5 % for reliable switching■ High-quality bellows and microswitch for a service life of> 500,000 cycles■ Rigid paddles from stainless steel to withstand pressuresurges and high medium temperatures

Additional Information:

  • Delivery Time: READY STOCK
Yes! I am InterestedRequest A Callback

Flow Switches

Flow Switches
  • Flow Switches
  • Flow Switches
  • Flow Switches
  • Flow Switches
  • Flow Switches
  • Flow Switches
  • Flow Switches
  • Flow Switches
  • Flow Switches
Get Best Quote
Product Price: Rs 1,450 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Flow Switch TypePaddle Flow Switch
Usage/ApplicationWATER
Model Name/NumberWFS 6000
Item CodeWFS6000
Flow Media TypeLiquid
APPLICATION The paddle type SPDT WFS series are designed to provide excellent performance where accuracy, reliability, and rugged construction are required used in liquid flow lines carrying water or any fluid neither harmful to brass and prosphor bronze nor classified as a hazardous fluids. They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate. The WFS series are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquids below 0 oC. These series may be used on liquids with high salt or chlorine content but is not for use in hazardous atmospheres. They may be also used outdoors but must be protected from weather or splashing water. All series WFS flow switches are designed for use only as operating controls. Where an operating control failure would result in personal injury and/or loss of property, it is the responsibility of user to add safety devices that protect against, or supervisory systems that warn of control failure.
Yes! I am InterestedRequest A Callback

WATER FLOW SWITCH ANERGY FSW P 251

WATER FLOW SWITCH ANERGY FSW P 251
  • WATER FLOW SWITCH ANERGY FSW P 251
  • WATER FLOW SWITCH ANERGY FSW P 251
Get Best Quote
Product Price: Rs 1,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Switch TypeSPST
Flow Switch TypeWater Flow Switch
BrandAnergy
Usage/ApplicationWater
Model Name/NumberFSW - P-251
Flow Media TypeLiquid
FEATURES• Simple and rugged construction• Suitable for non-corrosive fluids• Indicates the presence or absence ofwater flow to start and stop electricallyoperated equipment in a flow or no-flowcondition• Can be used for monitoring flows inhorizontal and vertical pipelines withupward water flow• Available in different modelsWhen the water flow hits the paddle of theflow switch, it operates an SPDT switch.Model : FSW - B-251Connection : 1" BSPMaterialsBody : BrassBase plate : Stainless SteelPaddle : Stainless SteelCover : ABSContact type : SPDTContact Rating : 10Amps,230V AC, 50 Hz, 1 PhMedia temp. : 0° to 120°CPermissible ambient temp. : 0° to 80°CMax. operating pressure : 10 bar(16 bar optional)Protection : IP 54
Yes! I am InterestedRequest A Callback

WATER FLOW SWITCH ANERGY FSW B 251

WATER FLOW SWITCH ANERGY FSW B 251
  • WATER FLOW SWITCH ANERGY FSW B 251
  • WATER FLOW SWITCH ANERGY FSW B 251
Get Best Quote
Product Price: Rs 1,200 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Switch TypeSPST
Flow Switch TypeWater Flow Switch
BrandAnergy
Usage/ApplicationWater
Model Name/NumberFSW - B-251
Flow Media TypeLiquid
FEATURES• Simple and rugged construction• Suitable for non-corrosive fluids• Indicates the presence or absence ofwater flow to start and stop electricallyoperated equipment in a flow or no-flowcondition• Can be used for monitoring flows inhorizontal and vertical pipelines withupward water flow• Available in different modelsWhen the water flow hits the paddle of theflow switch, it operates an SPDT switch.Model : FSW - B-251Connection : 1" BSPMaterialsBody : BrassBase plate : Stainless SteelPaddle : Stainless SteelCover : ABSContact type : SPDTContact Rating : 10Amps,230V AC, 50 Hz, 1 PhMedia temp. : 0° to 120°CPermissible ambient temp. : 0° to 80°CMax. operating pressure : 10 bar(16 bar optional)Protection : IP 54
Yes! I am InterestedRequest A Callback

Air Flow Switch FSA 101 ANERGY

Air Flow Switch FSA 101 ANERGY
  • Air Flow Switch FSA 101 ANERGY
  • Air Flow Switch FSA 101 ANERGY
Get Best Quote
Product Price: Rs 1,200 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Flow Switch TypeAir Flow Switch
Contact System TypeSPST
BrandAnergy
Usage/ApplicationAir
Model Name/NumberFSA 101
Flow Media TypeAir
FEATURES• Simple and rugged construction• Suitable for ducts carrying air or anyother non-corrosive gas• Indicates the presence or absence ofair flow to start and stop electricallyoperated equipment in a flow or noflowcondition• Can be used for monitoring flows inhorizontal and vertical ducts withupward air flowModel : FSA 101MaterialsBase plate : Stainless SteelMounting plate : GIPaddle : Stainless SteelCover : ABSContact type : SPDTContact rating : 10Amps, 230V AC, 50 Hz, 1 PhMedia temp. : 0°C to 80°CPermissible ambient temp. : 0°C to 80°CProtection : IP 54TECHNICAL DATAWhen the air flow hits the paddle of the flowswitch, it operates an SPDT switch.PRINCIPLE OF OPERATION
Yes! I am InterestedRequest A Callback

Digital Water Flow Meter

Digital Water Flow Meter
Get Best Quote
Product Price: Rs 1,800 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
MaterialPlastic Body
Line Size1 inch
BrandAster
Application MediaWater
Usage/ApplicationAutomotive
ColorBlack
Brand Aster
Accuracy +-2% Of Full Scale
Housing Material GF Nylon / Noryl
Model No FT 650
Fluid Water
Impeller Polypropylene
Bearing Ceramic
Maximum Temp 60degC
Maximum Pressure 5.0 kg/cm2
Pressure Drop 0.3 Kg/cm2 at Max.flow
Minimum Order Quantity 1 Unit
Product DescriptionOur digital flow meter necessarily has a flow sensor with a magnetic multi-bladed spinning rotor (impeller) mounted inside at right angles to the flow. The rotational speed of the impeller is proportional to the velocity of fluid. The pulse generated is transmitted and converted into a volumetric measurement. Our digital flow meters are individually calibrated to give reliable flow measurement. 

Features:-

  • Digital flow meter measuring flow rate from 0.05m
  • Remote Reset (Auto/Manual)
  • Optional computer interface with RS 485 or 4-20mA output
  • Dual Sensor, dual line, single meter.

Meter Functions:
  • Batcher and Totaliser: Relay gets energized after a fixed quantity of water passes through the sensor. The batcher has an auto reset, manual reset and dual relay operation facility. Batch quantity counts downwards till zero value.
  • Flow Comparator: The meter is supplied with two sensors for RO permeate and inlet/ reject line. The meter displays both the flow rates and also calculates percentage recovery.
  • The setting is done on Percentage Recovery If plant recovery is increased by the client to get more permeate, plant will trip thereby safeguarding expensive membranes.
  • Rate Switch Mode: The relay is programmed to energize whenever actual Flow falls below the set value. Display shows Low Flow Rate
  • Pulser: Meter can be configured to suit any metering/dosing pump Chemical dosing can be done online proportional to flow.
  • Opetional Data Logger: The flow meter is available with data logger option where flow rate & total flow with date & time is stored in a 2GB Memory card

Applications:
  • Beverage
  • Water Treatment
  • Pharma & Chemical
  • Dairy Plant
  • Bottling 
  • Boiler
  • Cooling Tower
  • Tower
Yes! I am InterestedRequest A Callback

Water Flow Meter

Water Flow Meter
  • Water Flow Meter
  • Water Flow Meter
Get Best Quote
Product Price: Rs 800 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Size0.5 - 2 Inch
MaterialBrass
Usage/ApplicationDomestic
DisplayAnalog
Line Size1/2" upto 3"
BrandKranti
Operating Pressure10kg
flow meter is an instrument used to measure linear, nonlinear, mass or volumetric flow rate of a liquid or a gas. When choosing flow meters, one should consider such intangible factors as familiarity of plant personnel, their experience with calibration and maintenance, spare parts availability, and mean time between failure history, etc., at the particular plant site. It is also recommended that the cost of the installation be computed only after taking these steps.

One of the most common flow measurement mistakes is the reversal of this sequence: instead of selecting a sensor which will perform properly, an attempt is made to justify the use of a device because it is less expensive. Those "inexpensive" purchases can be the most costly installations. This page will help you better understand flow meters, but you can also speak to our application engineers at anytime if you have any special flow measurement challenges.
Yes! I am InterestedRequest A Callback

Vane Type Water Flow Detector

Vane Type Water Flow Detector
  • Vane Type Water Flow Detector
  • Vane Type Water Flow Detector
Get Best Quote
Product Price: Rs 3,200 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Country of OriginMade in India

WFD Series water flow detectors are compatible with schedule 10 through 40 steel pipe, sizes 2 through 8 inch, and can be mounted in a vertical or horizontal position. WFD Series detectors consist of a rugged, NEMA 4-rated enclosure. Designed for both indoor and outdoor use, WFD Series detectors operate across a wide temperature range, from 32 to 120 °F.UL-listed models are equipped with tamper-resistant cover screws to prevent unauthorized entry. Inside, two sets of SPDT (Form C) synchronized switches are enclosed in a durable terminal block to assure reliable performance. The WFD Series detectors incorporate a mechanical retard feature, which minimizes the risk of false alarm due to pressure surges or air trapped in the sprinkler system. In addition, the mechanical retard’s unique sealed design is immune to dust and other contaminants. The WFD Series is designed to simplify installation. Two conduit openings permit easy attachment to the local alarm system. The retard mechanism and dual SPDT switches are field-replaceable.

Features & Benefits:
  • Two inch mounting hole provided in new WFD30-2 models
  • UL-listed models are NEMA 4 rated
  • Sealed retard mechanism immune to dust and other contaminants
  • Visual switch activation
  • Field-replaceable retard mechanism and SPDT switches
  • Rugged, dual SPDT switches enclosed in a durable terminal block
  • Accommodates up to 12 AWG wire
  • Designed for both indoor and outdoor use
  • 100% synchronization activates both alarm panel and local bell
  • Tamper-resistant cover screws
Certifications:
  • UL Listed S73
  • ULC CS169
  • CSFM 7770-1653:114
  • MEA Approved 167-93-E
  • FM Approved 3006195
Yes! I am InterestedRequest A Callback

Honeywell Water Flow Switch

Honeywell Water Flow Switch
  • Honeywell Water Flow Switch
  • Honeywell Water Flow Switch
  • Honeywell Water Flow Switch
  • Honeywell Water Flow Switch
Get Best Quote
Product Price: Rs 1,250 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandHoneywell
Line SizeUpto 6 Inch
Usage/ApplicationWater
Model Name/NumberWFS 6000
MaterialBrass Connection
Flow Media TypeLiquid
ColorRed , Black
APPLICATIONThe paddle type SPDT WFS series are designed to provide excellent performance where accuracy, reliability, and rugged construction are required used in liquid flow lines carrying water or any fluid neither harmful to brass and prosphor bronze nor classified as a hazardous fluids. They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate.The WFS series are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquids below 0 oC.These series may be used on liquids with high salt or chlorine content but is not for use in hazardous atmospheres.They may be also used outdoors but must be protected from weather or splashing water.All series WFS flow switches are designed for use only as operating controls.Where an operating control failure would result in personal injury and/or loss of property, it is the responsibility of user to add safety devices that protect against, or supervisory systems that warn of control failure.
Yes! I am InterestedRequest A Callback

Honeywell Water Flow Switch WFS6000

Honeywell Water Flow Switch WFS6000
  • Honeywell Water Flow Switch WFS6000
  • Honeywell Water Flow Switch WFS6000
Get Best Quote
Product Price: Rs 1,450 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Flow Switch TypeWater Flow Switch
BrandHoneywell
Usage/ApplicationWater
Model Name/NumberWFS6000
Flow Media TypeLiquid
ColorRed
APPLICATIONThe paddle type SPDT WFS series are designed to provide excellentperformance where accuracy, reliability, and rugged construction arerequired used in liquid flow lines carrying water or any fluid neitherharmful to brass and prosphor bronze nor classified as a hazardousfluids.They can be wired to close one circuit and open a second circuit whenliquid flow either exceeds or drops below the adjusted flow rate.The WFS series are recommended for liquid pressure and temperatureas mentioned below and must not be used on lines carrying liquids below0 oC.These series may be used on liquids with high salt or chlorine contentbut is not for use in hazardous atmospheres.They may be also used outdoors but must be protected from weather orsplashing water.All series WFS flow switches are designed for use only as operatingcontrols.Where an operating control failure would result in personal injury and/orloss of property, it is the responsibility of user to add safety devices thatprotect against, or supervisory systems that warn of control failure.
Yes! I am InterestedRequest A Callback

EXPLORE MORE CATEGORIES

© Surti Enterprises. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.